Sell ›› Ferro-Nickel ingots
SteelGrade.net
HOME  |  LOGIN  |  REGISTRATION  |  WHY JOIN?  |  ABOUT US  |  ADVERTISE  |  CONTACT US


Steel grades & alloys

Market reports

Overview of Q & A  |  Sample 2008 |  Sample 2007  |  Sample 2006 |  Sample 2005


  • 25.12.2006
    What is Yield Strength and Tensile Strength for JIS G3101 Grade SS400?
    The properties of SS400 grade are below:
    Yield Strength > 245 MPa,
    Tensile Strength 400 - 510 MPa
    Information is taken from WinSteel software

  • 25.12.2006
    What is the CE stadards for Hot Round Bars manufactured in Chiina . Is this CE Standards correct? EN10025 S235JR for Hot Round Bars, we need to export to Spain.
    As I understand CE is EN standard (CEN is name of European standard commitee). Yes, S235JR European grade is included in European standard EN10025. The Chinese equivalents of this grade are Q235A and Q235B.
    Information is taken from WinSteel software

  • 25.12.2006
    Need the Chemical and Mechanical properties for Chinese Equivalent Specification to DIN 17100 ST 52-3 for Sections like angles and flat bars
    The most closest Chinese equivalent of German grade you are interested in is 16Mn. See the composition below. Information on properties of Chinese grades is not included in our database.
    C 0.12 - 0.2%; Si 0.2 - 0.55%; Mn 1.2 - 1.6%; P, S < 0.045%; Cr, Cu, Ni < 0.3%
    Information is taken from WinSteel software

  • 21.12.2006
    Sorry for the confusion, with CS I was simply referring to Carbon Steel and not GOST or Canadian spec material. Out of interest, if you are able to advise the full international equivalents of the material grade, that would be appreciated, as we have not yet chosen where the equipment we require shall be fabricated, IE< USA, Korea, China or Europe.
    Please find world equivalences of the British grade you are interested in below:
    China: 16Mn
    Korea: SCC 3, STKM 16C
    USA: A 663 (45-80), A 667 (45-90)
    Europe: S355J0, S355J2G3
    Information is taken from WinSteel software

  • 20.12.2006
    Please advise equivalent CS grade to BS4360 grade 50D structural plate steel, BUT suitable for Low temps of down to -45 deg C.
    Would you precise what do you mean as CS? Is it CIS (GOST standard) or CSA (canadian standard)?

  • 18.12.2006
    We are urgently require the chemical composition of 27 Mn Cr B 5
    Please find composition of the European grade 27MnCrB5-2 you are interested in below: C 0.24 - 0.30%; Si < 0.4%; Mn 1.1 - 1.4%; P < 0.035%; S < 0.04%; Cr 0.3 - 0.6%; B 0.0008 - 0.005%
    Information is taken from WinSteel software

  • 18.12.2006
    I need the alternate material for EN-GJS-400-18U-LT (EN-JS 1049).
    Please find alternate materials for grade you are interested in: FCD 418-L (Japan), 42 2314 (Czech Republic), A 536 Grade 60/40/18 (USA, ASTM).
    Information is taken from WinSteel software

  • 18.12.2006
    What is the alloy composition of GB 699 grade 40Mn?
    Please find composition of this grade below: C 0.37 - 0.44%; Si 0.17 - 0.37%; Mn 0.7 - 1.0%; P, S < 0.035%; Cr, Cu < 0.25%; Ni < 0.3%.
    Information is taken from WinSteel software

  • 18.12.2006
    What is the Chinese equivalent of D2, A2, and 4150-PHT, steel?
    Please find Chinese equivalents of the grades you are interested in below:
    D-2 - Cr12Mo1V1
    A-2 - Cr5Mo1V
    4150 - ZG50CrMo
    Information is taken from WinSteel software

  • 14.12.2006
    you tell me the US equivalent to Chinese standard GB 699 grade 40Mn
    The US equivalents of the Cninese 40Mn grade GB 699 are AISI 1039 and 1035
    Information is taken from WinSteel software

  • 14.12.2006
    What is an AISI equivalent to a Chinese Q235 material. What is a Chinese equivalent to AISI 12L14
    Please notice that the both grades you are interested in have not exact equivalents. The most closest AISI equivalent of Chinese Q235 is 1009, the most closest equivalent of American AISI 12L14 in China is Y15Pb.
    Information is taken from WinSteel software

  • 14.12.2006
    What is the ASME or ASTM equivalency to S235JRG2
    The US equivalents of the European S235JRG2 are AISI 1009 and 1010 grades
    Information is taken from WinSteel software

  • 11.12.2006
    Could you tell me the UK equivalent of ASTM-A-366 LOW CARBON STEEL
    The UK equivalent of the ASTM A 366 grade is 14HR.
    Information is taken from WinSteel software

  • 08.12.2006
    What is the chinese equivalent steel for C.H.S. 168x10mm BS EN 10025 S355JO
    The Chinese equivalent of S355J0 European grade is 16Mn.
    Information is taken from WinSteel software

  • 08.12.2006
    What is the russian equivalent material specification for EN 10028-2 16Mo3 / German 1.5415 DIN 15Mo3
    Unfortunately neither European 16Mo3 nor German 15Mo3 grades have not exact Russian equivalents.
    Information is taken from WinSteel software

  • 07.12.2006
    I need to find equivalence of S235 in China but with special requirement of 2 elements : Si %< 0.040 and Si %+ 2.5 P % < 0.11.
    Please notice that Chinese standards define more content of P and S for this grade. So the single way for you is to agree with a producer to make more pure grade.
    Information is taken from WinSteel software

  • 07.12.2006
    What is the Russian equivalent of 409 Stainless Steel?
    Unfortunately this AISI stainless grade has not exact Russian equivalent. The most problem that most of Russian stainless grades contain Ni, which is absent in AISI 409.
    Information is taken from WinSteel software

  • 05.12.2006
    What is the chemical composition for grade GS-45?
    Please find composition of the grade you are interested in below: C < 0.25%, Si < 0.6%, Mn 0.2 - 0.5%, P, S < 0.04%
    Information is taken from WinSteel software

  • 04.12.2006
    Help me to find foreign equivalence of Russian Steels '20X13' & '08X17H6T'
    The foreign equivalents of 20Ch13 (2013) Russian grade are X20Cr13 (EuroNorms), 420 (AISI), 2Cr13 (China).
    Unfortunately 08Ch17N6T has not foreign equivalents.
    Information is taken from WinSteel software

  • 01.12.2006
    what is chemical composition of material grade DIN 20MnV6?
    Please find composition of the grade you are interested in below: C 0.16 - 0.22%; Si 0.1 - 0.5%; Mn 1.3 - 1.7%; P, S < 0.035%; V 0.1 - 0.2%
    Information is taken from WinSteel software

  • 29.11.2006
    what is american equililant of DIN 1.7380 10CrMo9-10 steel
    Please find American equivalents of German grade you are interesting in below: A 182 Gr F22 CI 1, A 182 Gr F22 Cl 3, A 199 (T22) , A 200 Gr T22 , A 213 Gr T22 , A 217 Gr WC9 , A 234 (WP22) , A 250 Gr T22 , A 335 Gr P22 , A 336 (F22) , A 336 (F22a) , A 336 Gr F22 Cl 1 , A 336 Gr F22 Cl 3 , A 336 Gr F22V , A 336 Gr F91 , A 369 (FP22) , A 387 Gr 22 , A 387 Gr 22L , A 426 (CP22) , A 508 Gr 22 , A 541 Gr 22 Cl 3 , A 541 Gr 22 Cl 4 , A 541 Gr 22 Cl 5 , A 541 Gr 22V , A 542 Type A , A 542 Type B , A 739 (B22) , A 873 , A 989 (K 21590)(Cl.1+3) , J 21890, K 21390, K 21590
    Information is taken from WinSteel software

  • 28.11.2006
    What AISI steel corresponds to ISO 1.0503?
    The AISI equivalent of ISO 1.0503 grade is 1045.
    Information is taken from WinSteel software

  • 28.11.2006
    what is the Polish equivalent of EN8?
    The Polish equivalents of EN8 British grade are 40 and 40A.
    Information is taken from WinSteel software

  • 24.11.2006
    What is the chemical composition for grade UHB 734L ?
    C 0.02%; Cr 18.3%; Mo 3.2%; Ni 12.2%; N 0.08%
    Information is taken from WinSteel software

  • 24.11.2006
    Please sendme the American equivalent for S235 JR material
    The American equivalent of S235 JR European grade is AISI 1010. This grade is included in number of ASTM standards also.
    Information is taken from WinSteel software

  • 22.11.2006
    I am looking for equivalent of Chinese GB 700 Q235 steel in ASTM, EN. ISO standards
    The equivalents of Chinese grade Q235 in Europe are S235JR, S235JRG1, S235JRG2, S235J2G3. As for USA there are many ASTM standards which covers this grade. We consider that the closest equivalent is UNS K 02502.
    Information is taken from WinSteel software

  • 22.11.2006
    What are some common equivalents that are used in Taiwan for the steel plate listed below? Australia = Grade 350 Plate Steel. AS3678-350 It is ok to say equivalents that are similar or close to this Australian standard.
    This grade is similar by composition to European S275JR. But I am not sure that S275JR is exact equivalent of AS NZS 3678 grade 350 as I havn't information on properties of this Australian grade. Also I don't know is this European grade used in Taiwan.
    Information is taken from WinSteel software

  • 22.11.2006
    What is the North American Equivalent of the following: Steel DC04 Laminated steel sheet C390 according to stamdard EN10139 ?
    The American equivalent of DC04 European grade is AISI 1006
    Information is taken from WinSteel software

  • 22.11.2006
    Please advise british/european equivalent material for ASTM A-283 Gr.C plate
    The British / European equivalent of this material is P265GH.
    Information is taken from WinSteel software

  • 22.11.2006
    WHAT IS THE GOST(RUSSIAN) EQUIVALENT OF ASTM B111(UNS C68700) & ASTM B171(UNS C63000).
    The Russian (GOST) equivalent of C68700 American grade is LaMsh77-2-0,05, the equivalent of C63000 is BrAZnN10-4-4.
    Information is taken from WinAlooy software

  • 22.11.2006
    Looking for a ASTM equivalent on the DIN#42CrMo4 or a material called VCMO 140
    The AISI equivalents of this material are 4140, 4142, 4137. These grades are included in number of ASTM standards. To select ASTM you need we should know which product you are interested in.
    Information is taken from WinSteel software

  • 22.11.2006
    What is the ASTM equivalant of C45E grade steel
    The AISI equivalents of this material is 1045. This grade is included in number of ASTM standards. To select ASTM you need we should know which product you are interested in.
    Information is taken from WinSteel software

  • 13.11.2006
    What is the Chinese Equivalent for GS38,GS45,C22?
    GS-38 has not any Chinese equivalent.
    GS-45 has not exact equivalent, the most closest Chinese grade is 25
    C22 - Chinese equivalent is 20
    Information is taken from WinSteel software

  • 13.11.2006
    What is the equivalency of russian material 0Ch18N12B in ASTM. What is the equivalency of russian material 0Ch18N10T in ASTM
    Please find list of all ASTM equivalents of Russian grades you are interested in below:
    0Ch18N12B
    A 1012 (TP 347 H), A 1012 (TP 347), A 1012 (TP 348), A 167 (347), A 167(348), A 182 (347 H), A 182 (347), A 182 (348), A 182 (F 347 H), A 182 (F 347), A 182 (F 348), A 193 (347), A 193 (B8C), A 193 (B8CA), A 194 (347), A 194 (8C), A 194 (8CA), A 213 (347 H), A 213 (347), A 213 (348), A 213 (TP 347 H), A 213 (TP 347), A 213 (TP 348), A 240 (347 H), A 240 (347), A 240 (348), A 240 (348), A 249 (347 H), A 249 (347), A 249 (348), A 269 (347), A 269 (348), A 269 (TP 347), A 269 (TP 348), A 271 (347 H), A 271 (347), A 276 (347), A 276 (348), A 312 (347 H), A 312 (347), A 312 (348), A 313 (347), A 314 (347), A 314 (348), A 320 (347), A 320 (B8C), A 320 (B8CA), A 336 (348), A 336 (F347 H), A 336 (F347), A 336 (F348), A 358 (347), A 358 (348), A 376 (347 H), A 376 (347), A 376 (348), A 376 (TP 347 H), A 376 (TP 348), A 403 (347 H), A 403 (347), A 403 (348), A 403 (CR 347 H), A 403 (CR 347), A 403 (CR 348), A 403 (WP 347 H), A 403 (WP 347), A 403 (WP 348 ), A 409 (347), A 409 (348), A 430 (347 H), A 430 (347), A 473 (347), A 473 (348), A 473 (S 34800), A 479 (347 H), A 479 (347), A 479 (348), A 480 (347 H), A 511 (MT347), A 554 (MT347), A 580 (347), A 580 (348), A 632 (347), A 632 (348), A 632 (TP 347), A 632 (TP 348), A 774 (347), A 774 (TP 347), A 78 (347), A 778 (TP 347), A 813 (347 H), A 813 (347), A 813 (348), A 813 (TP 347 H), A 813 (TP 347), A 813 (TP 348), A 814 (347 H), A 814 (347), A 814 (348), A 814 (TP 347 H), A 814 (TP 347), A 814 (TP 348), A 943 (TP 347 H), A 943 (TP 347), A 965 (F 347 H), A 965 (F 347), A 965 (F 348), F 2281 (347), F 593 (347), F 593 (348), F 593 Group 3 (347), F 594 (347), F 594 (348), F 594 Group 3 (347), F 738 (347), F 836 (347)
    0Ch18N10T
    A 1012 (TP 321 H), A 1012 (TP 321), A 167 (321), A 182 (321 H), A 182 (321), A 182 (F 321 H), A 182 (F 321), A 193 (321), A 193 (B8T), A 193 (B8TA), A 194 (321), A 194 (8T), A 194 (8TA), A 213 (321 H), A 213 (321), A 213 (TP 321), A 240 (321 H), A 240 (321) , A 249 (321 H), A 249 (321) , A 269 (321) , A 269 (TP 321), A 271 (321 H), A 271 (321) , A 276 (321) , A 312 (321 H), A 312 (321) , A 313 (321) , A 314 (321) , A 320 (321) , A 320 (B8T) , A 320 (B8TA) , A 336 (F321 H), A 336 (F321) , A 358 (321) , A 376 (321 H), A 376 (321) , A 376 (TP 321 H), A 376 (TP 321), A 403 (321 H), A 403 (321) , A 403 (CR 321 H), A 403 (CR 321) , A 403 (S 32109) , A 403 (WP 321 H), A 403 (WP 321), A 409 (321) , A 430 (321 H), A 430 (321) , A 473 (321) , A 479 (321 H), A 479 (321) , A 480 (321 H), A 480 (321) , A 511 (MT321) , A 554 (MT321), A 580 (321) , A 632 (321) , A 632 (TP 321), A 774 (321) , A 774 (TP 321), A 778 (321) , A 778 (TP 321), A 813 (321 H), A 813 (321) , A 813 (TP 321 H), A 813 (TP 321), A 814 (321 H), A 814 (321) , A 814 (TP 321 H), A 814 (TP 321) , A 943 (TP 321 H), A 943 (TP 321) , A 965 (F 321 H), A 965 (F 321), F 2281 (321), F 593 (321) , F 593 Group 3 (321), F 594 (321) , F 594 Group 3 (321), F 738 (321), F 836 (321)
    Information is taken from WinSteel software

  • 10.11.2006
    Are 16 Ni Cr4 and European Standard Nurmber 0.7050 identical ?
    16NiCr4 and 0.7050 are not identical materials.
    16NiCr4 is alloy steel grade, its number is 1.5714.
    0.7050 is iron, the name of this grade is GGG50.
    Information is taken from WinSteel software

  • 08.11.2006
    WHAT IS THE EQUIVALENCY OF ASTM A569 GRADE 50 IN EURO STANDARD?
    The European equivalent of ASTM A569 Grade 50 is E295 by EN 10025-2.
    Information is taken from WinSteel software

  • 08.11.2006
    What is the chemical composition of russian material 12XM. Is it a forging or rolled plate.
    Please find compostion of Russian 12ChM steel grade below:
    C < 0.16%; Si 0.17 - 0.37%; Mn 0.4 - 0.7%; P < 0.025%; S < 0.025%; Cr 0.8 - 1.1%; Mo 0.40 - 0.55%; Ni < 0.3%; Al < 0.02%; Cu < 0.2%.
    This is a steel grade which is used in Russia for manufacture of different kinds of products, i.e. flat, long, tubes.
    Information is taken from WinSteel software

  • 07.11.2006
    I am loking for a japenes equivalent of BS4360 50D
    The exact Japanese equivalents of BS4360 50D grade are SM 490, STK 490, STKR 490.
    Information is taken from WinSteel software

  • 07.11.2006
    1) French (AFNOR) or EN equivalent to ASTM A515 grade 70 (carbon stell plate). 2) AISI or ASTM equivalent to AFNOR NF A48C1
    1) The European equivalent of ASTM A515 Grade 70 is P295GH.
    2) French standard AFNOR NF A 48C1 doesn't exist. May be you mean A 48 CP French steel grade? This grade has a number of equivalents in USA including ASTM A515 Grade 70.
    Information is taken from WinSteel software

  • 07.11.2006
    What is the US equivlent to S45C?
    The US equivalent of S45C Japanese grade is AISI 1045
    Information is taken from WinSteel software

  • 03.11.2006
    I'm looking for a Chineese equivalant GB Standard for material Designations of UNS G43200, UNS G93106 and 18CrNiMo7 this would be ASTM A29
    Please find Chinese equivalents of UNS grades you are interested in below:
    G 43200 - G20CrNi2Mo, G 93106 - G10CrNi3Mo
    As for 18CrNiMo7 this grade has not exact equivalent in China.
    Information is taken from WinSteel software

  • 02.11.2006
    What is the ASTM equivalent of DIM 2448 ST37.0
    The American equivalents of DIN 2448 St 37.0 German steel are AISI 1009 and AISI 1010. Both these grades are included in number of ASTM standards. To select ASTM you need we should know which products you are interested in.
    Information is taken from WinSteel software

  • 27.10.2006
    Kindly please inform me which are the producers from Russian Federation and CIS, producing steel sheets made out of steel grade 30MnB5, according to EN 10083/3 Thank you very much in advance
    TUnfortunately none producer in CIS doesn't produce sheets of this grade. Square concast billets of the grades are produced by ISTIL-Ukraine mill.
    Information is taken from WinPlant. BLACK software.

  • 25.10.2006
    What is an equivalent to A284 Grade C or D (such as 1020 or 1040 steel)?
    Please notice that the A 284 Gr. C and A 284 Gr. D grades have not AISI equivalents. The UNS equivalents of these grades are K 01804, K 02401 and K 02702
    Information is taken from WinSteel software

  • 25.10.2006
    Equivalent ASME of Ghost 09G2S
    Unfortunately this popular Russian grade has not equivalents in USA
    Information is taken from WinSteel software

  • 25.10.2006
    WHAT IS THE US ASTM EQUIVALENT TO STAINLESS STEEL SUS 409 L, AND WHAT IS THE DIFFERENT BETWEEN SUS 409L TO SUH 409
    The SUS 409 L grade has not exact American equivalent. The most closest equivalent is AISI 409. Unfortunately I can't indicate the ASTM exactly as this grade is used for different products and included in different ASTM standards.
    SUH 409 is the same as SUS 409 L grade but with high carbon content. More precisely AISI 409 is exact equivalent of SUH 409 whereas SUS 409 L has low carbon (near 0.02%). SUH means that the grade is used for flat products manufacture.
    Information is taken from WinSteel software

  • 13.10.2006
    What is the cross reference ASTM material for SS400
    The American equivalents of Japan SS 400 (G 3101 Rolled steels for general structure) grade are AISI 1012, AISI 1015. These grades are included in various ASTM standards.
    Information is taken from WinSteel software

  • 12.10.2006
    Can you give me a British equivalent material for 15CrNi6?
    The British equivalent of the material you are interested in is 14NiCr6 by BS EN 10084
    Information is taken from WinSteel software

  • 04.10.2006
    have a material reference on a German drawing V4A-E . what is the composition of this material
    Please find composition of the grade you are interested in below: C < 0.08%; Si < 1%; Mn < 2%; P < 0.045%; S < 0.015%; Cr 16.5-18.5%; Mo 2 - 2.5%; Ni 10.5 - 13.5%; Ti < 0.7%
    Information is taken from WinSteel software

  • 04.10.2006
    What is equivalent to AMS 5647-304L in BS,DIN and EN standards ?
    Please find European equivalents of the grades you are interesting in below:
    BS: 304 C 12, 304 S 11
    DIN: X 2 CrNi 18-9
    EN: X2CrNi18-9, X2CrNi19-11
    Information is taken from WinSteel software

  • 03.10.2006
    What is the API grade equivalent to Cm3 - 5cn GOST 380 10,20 GOST1050?
    Please notice that it is impossible to compare Russian ordinary and quality grades, which are used in various industry fields with special API grades, which are used for pipelines and casing tubes. Of course, tubes of St3ps/sp, 10 and 20 grades are produced in Russia for the same purposes but these tubes don't satisfy to API requirements. Just therefore all Russian and Ukrainian tube mills produce tubes and pipes according API using API (not Russian) grades.
    Information is taken from WinSteel software

  • 03.10.2006
    What are the ASTM and BS EN 10025 eqivalents of E24-2 steel to NF A 35-501
    The European equivalent of E 24-2 to AFNOR NF A 35-501 grade is S235JR to EN 10025. As for ASTM this grade has not exact equivalent. The most closest equivalent is AISI 1020.
    Information is taken from WinSteel software

  • 03.10.2006
    What is steel standard M-3? Does it have an A.S.T.M. or A.S.M.E. equivalent ? Please include a copy of the standard.
    The grades you are interested in is tool steel. Its equivalents are UNS T 11302 and ASTM A 600 Gr.M-2.
    Information is taken from WinSteel software

  • 02.10.2006
    chinese equivalent of AISI 1020 and AISI 1022 cold rolled steel 13 gauge
    The Chinese equivalents of the grades you are interested in are:
    - for AISI 1020 grade 20;
    - for AISI 1022 grade 20MnG.
    Information is taken from WinSteel software

  • 02.10.2006
    Please advise the Australian equivalent of BS 970-EN-8. (The most common stainless steel is Australia is Grade 316)
    The new name of British EN8 steel grade is 080 M 40. The Australian equivalents of this grade is 1040 (AS 1442, AS 1443). Please notice that this grade is not stainless.
    Information is taken from WinSteel software

  • 29.09.2006
    CHEMICAL SPECIFICATION OF EN26 AND EQUIVALENT BRITISH GRADES?
    The modern British equivalent of EN26 grade is 826 M 40.
    Composition of the EN26 grade please see below: C 0.36-0.44%, Si 0.10-0.40%, Mn 0.45-0.70%, Ni 2.30-2.80%, Cr 0.50-0.80%, Mo 0.45-0.66%, P 0.04% max, S 0.04% max.
    Information is taken from WinSteel software

  • 25.09.2006
    what is the chinese equivalent of ST12?
    The Chinese equivalent of St12 steel grade is 08F
    Information is taken from WinSteel software

  • 20.09.2006
    What is the ASMe equivalent material to Chinese 20Cr?
    The AISI equivalents of this grade are 5117, 5120 and 5120 H. Is it enough for you or you need ASME standards also?
    Information is taken from WinSteel software

  • 20.09.2006
    What is the EN and DIN grade equivalent for 15ChSND (GOST) ?
    Unfortunately the Russian grade you are interested in has not exact European equivalents. The most closest (by composition) grade is S 355 J0W.
    Information is taken from WinSteel software

  • 18.09.2006
    Supplier is quoting GB/T 699-1999 #20 Steel what is the American Equivalent to this? I am concerned because they are showing me for this material elongation > or= 1.3%. We need to weld to carbon steel plates SA-36.
    The AISI equivalent of Chinese 20 grade according to GB/T 699 'Quality carbon structural steels' standard is 1020. Unfortunately this grades is not covered by SA 36.
    Information is taken from WinSteel software

  • 18.09.2006
    What in the EN and DIN equivalent for 15X and 12XH3A steel
    The German/European equivalents of the 15X grade are 15Cr2 and 17Cr3.
    The German/European equivalents of the 12XH3A grade are 14 NiCr 14 and 115NiCr13.
    Information is taken from WinSteel software

  • 14.09.2006
    What is the material equivalent of ASTM 6061-T6 in China (GB/YB)?
    The Chinese equivalent of ASTM 6061 T6 grade is LD30
    Information is taken from WinAlloy software

  • 11.09.2006
    Dear sir, We are manufacture of I c engine valves & required following Steel: TY 14-1-3092-81 Grade 40x10c2m correspond to GOST 5632-72 Round steel bar 18mm dia . Please send the manufacturers complete adress with mail id contact phone no etc.
    The bars you need are produced in Ukraine by Dneprospetsstal plant.
    Yuzhnoe Shosse, 69008 Zaporozhye, Ukraine
    Marketing and Sales (+380 61) 283 4032, fax (+380 612) 136 032, E-mail: SecrKD@dss.com.ua
    Head of Sales Management (+380 61) 283 4037, fax (+380 612) 136 016, E-mail: Shabanov@dss.com.ua
    Head of Sales Department (+380 61) 283 4033, fax (+380 612) 136 016, E-mail: kisenko@dss.com.ua
    Information is taken from WinPlant. BLACK software.

  • 05.09.2006
    Is Q345B equivalent to AH36
    These two grades are not equivalent. The grades are used for different kinds of products.
    Information is taken from WinSteel software

  • 05.09.2006
    What is equivalent EN and DIN steel grade for galvanized strips to Chinese Q195 ?
    The German/European equivalents of the Q195 Chinese grade are S185 and St 33.
    Information is taken from WinSteel software

  • 05.09.2006
    Dear Sir, Please give me the chemical & phy. % of the under meantioned spec.by e.mail L68 GOST- 1018-77 & 5169-77
    Please find composition and property of Russian L68 brass below:
    Cu 67.0 - 70.0%, Ni < 0.3%, Fe < 0.07%, Pb < 0.03%, P < 0.005%, As < 0.005%, Bi < 0.002%, Sb < 0.002%, S < 0.002%, OT < 0.2%, Zn - Rest.
    Tensile Strength > 290 MPa (in depending of band thickness), Elongation > 42%
    Information is taken from WinAlloy software

  • 31.08.2006
    Please tell me closest American equivalent steel plate to German spec. S355J2G3(1.0570)
    The American equivalents of the European grade S355J2G3 are ASTM A 633 Gr. C and ASTM A 812 Gr. 65.
    Information is taken from WinSteel software

  • 30.08.2006
    Chemical specification of EN 8, EN 24 and your equvalant grade
    Please notice that the grades you are interested in are old British grades.
    See compositions and bew names of the grades below:
    EN8. New name 080M40, composition: C 0.35 - 0.45%; Si 0.05 - 0.35%; Mn 0.6 - 1.0%; S, P < 0.06%.
    EN24. New name 817M40, composition: C 0.35 - 0.45%; Si 0.10 - 0.35%; Mn 0.45 - 0.7%; Ni 1.3 - 1.8%; Cr 0.9 - 1.4%; Mo 0.2 - 0.35%; S, P < 0.05%.
    Please specify what do you mean "your equivalent grade"?
    Information is taken from WinSteel software

  • 24.08.2006
    What is the Chinese Equivilant of : 34CrNiMo6 / werkstoff.Nr 1.6582
    Unfortunately exact Chinese equivalent of European 34CrNiMo6 grade doesn't exist. The most closest Chinese grade is 40CrNiMoA
    Information is taken from WinSteel software

  • 23.08.2006
    who are the manufacture and what are the comparison for the price and delivery date for steel as follows: - steel sheet A 573 Grade 70 ASTM
    The sheeets you need are produced in CIS by: Azovstal Iron and Steel Works, Mariupol Ilyich Iron and Steel Works, Severstal and Ural Steel.
    Others questions of your inquiry are not free (see samples of free questions)
    Information is taken from WinPlant. BLACK software.

  • 23.08.2006
    What is the Chinese equivalent for 080M15 and who produces this grade?
    The Chinese equivalent of 080 M 15 British grade is 15.
    As for producers we have information on CIS steel producers only in our database.
    Information is taken from WinSteel software

  • 23.08.2006
    What is the chemical composition of steel ASTM A662-82? What is the chemical composition of EN 10139 DC 04?
    Please find composition of EN 10139 DC04 grade below: C < 0.08%; Mn < 0.4%; S,P < 0.03%
    As for ASTM A662-82, this standard covers 19 different grades. Which grade you interested in?
    Information is taken from WinSteel software

  • 22.08.2006
    What is the Brazilian equivalent of USt 37-2? And what is it´s composition?
    Unfortunately the USt 37-2 German grade has not exact Brazilian equivalent.
    Composition of the grade see below: C < 0.17%, Mn < 1.4%, P, S < 0.045%, N < 0.012%
    Information is taken from WinSteel software

  • 22.08.2006
    What is the American equivalent to DIN Std. 52.2?
    Unfortunately this DIN grade has not exact American equivalent. The most closest garde is ASTM A252.
    Information is taken from WinSteel software

  • 15.08.2006
    What is the Chinese equivalent for AISI 1144
    The Chinese equivalent for AISI 1144 grade is Y40Mn
    Information is taken from WinSteel software

  • 14.08.2006
    What is grade 70 Plate? What is ASTM 515 Plate? What are there compositions? How are these plates similar to A36 plate and BQ plate
    The name of ASTM A515 standard is 'Pressure Vessel Plates, Carbon Steel, for Intermediate-and Higher-Temperature Service'. So it defines plates used at high temperatures for pressure vessels.
    ASTM A36 'Carbon Structural Steel' covers plates of ordinary grades.
    Composition of A 515 Gr 70: C < 0.31%, Si 0.13 - 0.45%, Mn < 1.3%, S < 0.035%, P < 0.035%.
    Information is taken from WinSteel software

  • 14.08.2006
    We are trying to find the equivalent material specifications for the Alloy 15CDV6 steel? All the differant world specs would be great
    This French grade has the following equivalents: 1.7734 in Germany and 15 CrMoV 6 in Italy.
    Information is taken from WinSteel software

  • 14.08.2006
    KINDLY LET ME KNOW THE INDIAN (IS) & ASTM EQUIVALENT OF 25 Cr Mo 4 DIN 17200 / SAE AISI 4130 / UNS 41300
    Unfortunately our database doesn't contain information on Indian grades. As for ASTM please find the list of equivalents below: A 29 (4130), A 322 (4130), A 331 (4130), A 506 (4130, A 507 (4130), A 513 (4130), A 519 (4130), A 646 (11)(4130), A 646 (4130), A 689 (4130), A 711 (4130), A 752 (4130), A 829 (4130), A 866 (4130), A 915 Gr SC 4130
    Information is taken from WinSteel software

  • 14.08.2006
    Please tell me the USA equivalent of the swedish specification: SS-2090-30
    The USA equivalent of the Swedish grade you are interested in is AISI 9255
    Information is taken from WinSteel software

  • 11.08.2006
    What is the composition and mechanical properties of AQ42 as per UNI 3965
    The composition and properties of the grade you are interested in are below:
    C < 0.21%, S < 0.45%, P < 0.45%
    Yield strength < 2700 kg/cm2
    Tensile Strength < 4200 kg/cm2
    Elongation < 20%
    Notice that this standard is not valid since 1921.
    Information is taken from WinSteel software

  • 10.08.2006
    What is China equivalent of AISI E4340H
    The closest Chinese equivalent of AISI E4340H grade is 40CrNiMoA
    Information is taken from WinSteel software

  • 09.08.2006
    Trying to find the material specification (chemistry and mechanical properties) for China steels; 8F andQ-235A
    Please find compositions of the Chinese grades you are interested in below:
    08F: C 0.05 - 0.11%; Si < 0.03%; Mn 0.25 - 0.50%; P, S < 0.035%; Cr < 0.1%; Ni, Cu < 0.25%
    Q 235 A: C 0.14 - 0.22%; Si < 0.3%; Mn 0.30 - 0.65%; P < 0.045%; S < 0.05%; Cr, Ni, Cu < 0.3%
    Information is taken from WinSteel software

  • 09.08.2006
    Please give Chemical and Mechanical Properties of BS1449 PART1 CS1. What is the equivalent Chinese mild steels number and grade for the following BS1449-PART1mild steels?
    Please find composition of the British grade you are interested in below: C < 0.06%; Mn < 0.35%; P < 0.035%; S < 0.025%. Our database doesn't contain information on properties of this grade. This grade hasn't any exact equivalents in China.
    Information is taken from WinSteel software

  • 08.08.2006
    Cross reference to ASTM from DIN C10C
    Unfortunately the C10C German grade hasn't exact equivalent in USA. The most closest equivalent by composition is AISI 1009.
    Information is taken from WinSteel software

  • 07.08.2006
    EN3679, what is the equivalent BS spec and can you supply this materials composition/tensile properties.
    The BS equivalent of EN3679 is 17-7 PH. Composition see below. Unfortunately we have not information on properties of this grade.
    C < 0.09%, Si < 0.7%, Mn < 1%, P < 0.04%, S < 0.015%; Cr 16 - 18%, Ni 6.5 - 7.8%, Al 0.7 - 1.5%.
    Information is taken from WinSteel software

  • 04.08.2006
    What U.S. metals are equivilent to "52d" ?
    U.S. equivalents of the 52 D Hungarian grades are K 12000, K 01600.
    Information is taken from WinSteel software

  • 03.08.2006
    What is UK/ European classification for steel with following composition C: 0.25 - 0.35%; Mn: 0.40 - 0.80 %; Si: 0.20 - 0.35%; P: <= 0.040%; S: <= 0.050%; Cr: 0.80 - 1.10%; Mo: 0.15 - 0.25%
    To all appearances the grade you are interested in is Russian 30ChM or Chinese 30CrMo grade. We have found the similar grades in Poland, Italy, Japan, Sweden also. But these grades have not exact equivalents in UK/Europe. The most closest European equivalents are 25CrMo4 and 34 CrMo4
    Information is taken from WinSteel software

  • 03.08.2006
    WHAT ARE THE CANADIAN AND US EQUIVILANTS TO THE BRITISH SPECIFICATION "BS4360 GR55C"
    The US equivalent of the British BS4360 55 C grade is ASTM A572 (65).
    Information is taken from WinSteel software

  • 02.08.2006
    Please sendme equvivalent grade of Q235 & Q195 in BS & SAE. and send me chemical composition of these grades.
    The EN BS equivalent of the Q235 Chinese grade is S235J2G3.
    The British equivalents of the Q195 grades are 15 HR and S185; American equivalent is ASTM A 366.
    Compositions is sent by e-mail.
    Information is taken from WinSteel software

  • 02.08.2006
    I would like to learn the AISI, ASTM ..etc specs for the following two 1. en24t 2. SS-EN 10 113 S355NL hot rolled, weldable, fine grain structural steel
    The AISI equivalent of the EN 24 T old British grade is 4340.
    The S355NL has not exact equivalent in USA. The most closest grades (by composition) are ASTM A724 Gr.A, A734 Gr.B, A860.
    Information is taken from WinSteel software

  • 01.08.2006
    I am trying to find comparsion tables for Chinese steel vs USA steel. For example...what does Chinese Q235 steel compare to in the US standard?
    I think that our WinSteel software is the best choice for you. Using it you can find American equivalent of not only any Chinese grade but other world grade in seconds.
    As for your question, unfortunaterly this Chinese grade has not exact US equivalent. The most closest grades are ASTM A 161 (LCST) by composition and AISI 1012 by designation.
    Information is taken from WinSteel software

  • 01.08.2006
    What is the DIN EN equivalent for the Russian GOST Designation 14ChGS steel?
    Unfortunaterly this Russian grade has not exact European equivalent. The most closest German grades are 1.8701 and 1.8702. The main difference is in C content. Russian grade has C 0.11-0.16%, the German grades 0.24% max and 0.25% max respectively.
    Information is taken from WinSteel software

  • 31.07.2006
    Can You send me info what is paralel in Yugoslav standard for : SS 235 JRG 2; S 235 JR; DC 01; DC 11
    Please find the Yugoslav equivalents of the grades you are interested in below:
    for S235JRG2 grade - C0361
    for DC01 grade - C0146
    for S235JR grade similar (not the same) Yugoslav grades are C0361 and C0370
    DC11 is non-existent grade. May be you mean DD11?
    Information is taken from WinSteel software

  • 31.07.2006
    what grade of material is T1 its an Italian spec.
    T1 is British tool steel. Italian equivalences of this grade are HS 18-0-1, X 75 WCrV 18. The grade with commercial name RC of Italian Acciaierie Valbruna is also suitable.
    Information is taken from WinSteel software

  • 31.07.2006
    Can I replace 34 CrNiMo 6 steel with AISI 4340 / AISI 9840. In addition to strength and toughness I require steel which is highly corrosion resistant. Please guide.
    The best AISI equivalent of the 34 CrNiMo grade is 4340
    Information is taken from WinSteel software

  • 27.07.2006
    I have an italian steel specification U85MnV8Ku (MST) on a drawing . Can you tell me the british closest equivalent.
    The similar (not the same) British grade is BO 2
    Information is taken from WinSteel software

  • 27.07.2006
    What is the equivalent BS EN number and grade for the following Chinese mild steels? GB/T699-1999 Grade 45A; GB/T4354-1994 Grade 45#; 3) GB/T8163-1999 Grade 20#
    The European (British) equivalents of Chinese steel grades you are interested in are:
    GB/T4354-1994 Grade 45 - C45, C45E BS EN 10083-1
    GB/T699-1999 Grade 45A - C45, C45E BS EN 10083-1 (45A is the same as 45 but with low P and S content)
    GB/T8163-1999 Grade 20 - C22E BS EN 10297-1
    Information is taken from WinSteel software

  • 26.07.2006
    WHAT IS THE ASTM EQUIVALENT OF AISI4140
    Please find the ASTM equivalents for AISI 4140 grade you are interested in below: A 193 (4140), A 193 (B7M), A 194 (4140), A 194 (7), A 194 (7M), A 29 (4140), A 320 (L7)(4140), A 320 (L70)(4140), A 320 (L7M)(4140), A 322 (4140), A 331 (4140), A 506 (4140), A 513 (4140), A 519 (4140), A 646 (12)(4140), A 646 (4140), A 689 (4140), A 711 (4140), A 752 (4140), A 829 (4140), A 866 (4140).
    Information is taken from WinSteel software

  • 26.07.2006
    chmical and mechannical specification for Nissan SP221
    We have found that the closest European equivalent of this grade is DD11. Unfortunately information on chemical and mechanical properties of Nissan SP221grade are not presented in our database.
    Information is taken from WinSteel software

  • 24.07.2006
    Please tell me the British Equivalent steel grade for the Steel S 235 JR as EN 10025.
    Please notice that standard EN 10025 is valid in UK also. This standard is named as BS EN 10025. So the S275JR is British grade also. If you need old equivalent of this grade the 37/23 HR may be considered as similar (not the same) grade.
    Information is taken from WinSteel software

  • 24.07.2006
    What is the equivalent DIN standard steel to AISI 4340
    The 40 NiCrMo 6 (1.6565) is DIN equivalent of the AISI 4340 grade you are interested in.
    Information is taken from WinSteel software

  • 20.07.2006
    I NEED CHAMICAL COMPOSITION OF FOLLWING MATERIALS: PLEASE HELP ME! SA 182 F 51, SA 182 F 321
    Please find compositions of the grades you are interested in below:
    SA 182 (F51): <0.03%; Si<1%; Mn<2%; P<0.03%; S<0.02%; Cr 21-23%; Mo 2.5-3.5%; Ni 4.5-6.5%; N 0.08-0.2%.
    SA 182 (F321) C<0.08%; Si<1%; Mn<2%; P<0.045%; S<0.02%; Cr 17-19%; Ni 9-12%.
    Information is taken from WinSteel software

  • 18.07.2006
    I am looking for Steel 40 GOST 1050-88 composition and equivalent International standards in DIN or ISO .
    C 0.37-0.45%; Si 0.17-0.37%; Mn 0.5-0.8%; P<0.035%; S<0.04%; Cr<0.25%; Ni <0.3%, Cu<0.3%; N<0.008%; As<0.08%.
    German equivalence is C40
    Information is taken from WinSteel software

  • 18.07.2006
    Please give Chemical and Mechanical Properties of S235JRG1 and St 35 Bk
    Please find chemical compositions of the grades you are interested in:
    S235JRG1: C<0.2%; Mn<1.4%; S<0.045%, P<0.045%; N<0.007%
    St 35: C<0.17%; Si<0.35%; Mn>0.4%; P<0.05%, S<0.05%; N<0.007%
    As for properties for the grades they depend of kind of products do you need and other parameters. To find this data for you we need more detailed information.
    Information is taken from WinSteel software

  • 18.07.2006
    Is there a Chinese or international equivalent to European EN10025 S275JR? Thanks.
    Chinese equivalent of European S275JR grade is Q 255 A.
    Information is taken from WinSteel software

  • 18.07.2006
    Hi, I need to find out the North American material of the European material Brass CuZn39PB3 DIN17660... Thank you.
    American equivalent of European brass CuZn39Pb3 is C 38500
    Information is taken from WinAlloy software

  • 17.07.2006
    Pleas, can you tell me european equivalent for material SAE 1020. Thank you for answer
    The European equivalences of SAE 1020 grade are C22, C22E and C20D.
    Information is taken from WinSteel software

  • 14.07.2006
    What is the shear strength value of steel AISI 1144
    Please notice that majority steel grade databases and guide-books don't contain information on shear strength values of the grades. But usually the shear strength value is near 0.5...0.57 of tensile strength of a grade. So you can easily calculate this value for AISI 1144 yourself.

  • 07.07.2006
    Could you tell me the American Equiv. of 39NiCrMo3 uni 7845. The pin/shaft is being used on sheave trains for a Leitner Ski lift. Dimensions of the pin are as follows 65mm Dia. approx 450.50mm in Length. Thanks in advance.
    The American equivalent of Italian 39NiCrMo3 grade is AISI 9840.
    Information is taken from WinSteel software

  • 06.07.2006
    Is there a Chinese equivalent to British 50 C BS4360, also Chinese equivalent to HR43F35 (tenform)? please .
    The Chinese equivalent of 50C British grade is 16Mn. 43/35 HR grade has not any equivalences in China.
    Information is taken from WinSteel software

  • 06.07.2006
    Could you please give me the Chinese equivalent to ST52-3 high strength steel. and would it be formable?
    The Chinese equivalent of St 52-3 is 16Mn. Unfortunately our database doesn't contain any properties of this grade. But it seems as formable.
    Information is taken from WinSteel software

  • 06.07.2006
    who in CIS produce Hot Rolled steel plate - steel grade 35CrMo4 DIN 17200 W.n 1.6580 - Thickness : 5 - 10 mm
    Please notice that 35 CrMo 4 and 1.6580 are different grades. W.n. of 35 CrMo 4 is 1.7220, name of 1.6580 grade is 30 CrMo 4. Unfortunately none mill in CIS doesn't produce plates of these grades. Do you need plates of Russian equivalences of the grades?
    Information is taken from WinPlant. BLACK and WinSteel software.

  • 04.07.2006
    pls.send me best sources of hot roll steel confirming toEN10025,S275JR.SQUARE CUT ON BOTH SIDES
    The squares you need are produced in CIS by MMK (Magnitogorsk Iron & Steel Works) only
    Information is taken from WinPlant. BLACK software.

  • 28.06.2006
    Could you please give me a list of mills in the CIS that produce HR COILS/PLATES as per API 5L Grades
    HR COILS/PLATES as per API 5L Grades are produced in CIS by: MMK - Magnitogorsk Iron & Steel Works, NLMK - Novolipetsky Iron & Steel Works, Severstal, Azovstal, Ural Steel
    Information is taken from WinPlant. BLACK software.

  • 28.06.2006
    german equivalent to ss304
    The German equivalent of Stainless Steel 304 is X 6 CrNi 18-10.
    Information is taken from software

  • 27.06.2006
    ould you please give an AISI and/or SAE equivalent for BS.1449/1 HS P15. We are using this material for machined flanges.
    PLease notice that US equivalents of British BS 1449/1 HS P15 grade are A 569 and A 366 ASTM grades. Unfortunately the both grades havn't AISI/SAE designations.
    Information is taken from WinSteel software

  • 23.06.2006
    i want to know the DIN number of grade P22
    Do you mean in your inquiry A335 Gr P22 ASTM grade? If yes, the DIN equivalent of this grade is 1.7380.
    Information is taken from WinSteel software

  • 23.06.2006
    I would to Equivalent standards of UNI 7070 Fe 430, What B , C & D indicate ?
    Please find compositions and European equivalences of Italian grades below.
    Fe 430 B: C < 0.22, P < 0.05, S < 0.05, N < 0.009, European equivalent is S275JR.
    Fe 430 C: C < 0.2, P < 0.045, S < 0.045, N < 0.009, European equivalent is S275J0.
    Fe 430 D: C < 0.2, P < 0.04, S < 0.04, European equivalent is S275J0.
    Letters B, C, D indicate purity of steel (depends of P and S content).
    Information is taken from WinSteel software

  • 22.06.2006
    What are the other international equivalent materials for 42 CrMo4?
    The international equivalences of the European grade you are interested in are 708 M 40 in UK, 4140 in USA, SCM 440 in Japan, 38ChM in Russia.
    Information is taken from WinSteel software

  • 22.06.2006
    What is the equivalent in BS for JIS G3141 SPCF
    The British equivalences of the Japanese grade you are interested in are 1 HR, 2 HR according to BS 1149 and DC04 according to EN 10130.
    Information is taken from WinSteel software

  • 22.06.2006
    Please confirm the compatible filler wire to weld SS316 with SS304 by GTAW welding.
    Unfortunately we have not information on GTAW welding in our database. But to all appearances 316 and 304 are names of stainless grades according to AISI. Notice that although the both grades are stainless they have different compositions and properties.

  • 20.06.2006
    I am looking for analogues of Russian Stell 40X in DIN
    The DIN equivalents of the 40Ch (40) Russian grades are 41Cr4 (1.7035) and 42Cr4 (1.7045) grades.
    Information is taken from WinSteel software

  • 16.06.2006
    Who manufacturers 4140,5140 and ck45 round bars in Russia?
    Please find a list of mills which produce rounds of grades you are interested in.
    ck 45:Oskol Electric Steel Works, Izhstal, Volgograd Steel Works "Red October", Zlatoust Metallurgical Works, Serov Steel Works
    4140: Oskol Electric Steel Works, Chelyabinsk Iron and Steel Works - MeChel, Izhstal, Volgograd Steel Works "Red October", Zlatoust Metallurgical Works, Serov Steel Works
    5140: Oskol Electric Steel Works
    Information is taken from WinPlant. BLACK software.

  • 15.06.2006
    What composion is CuZn39Pb 3F 51,CuZn36 Pb3,CuNi12Zn38Mn6Pb,and which metal are belong to? They is called which name In China or which materical is same or similar with China.
    Please find compositions of the grades you are interested in below: CuZn39Pb3: Cu 56-59%, Pb 2.5-3.5%, Ni<0.3%, Fe<0.35%, Zn - rest
    CuZn36Pb3: Cu 60-63%, Pb 2.5-3.7%, Ni<0.3%, Fe<0.35%, Zn - rest
    CuNi12Zn38Mn6Pb: Cu 42-45%, Pb 1-2.5%, Sn<0.2%, Ni 11-13%, Fe<0.3%, Mn 4.5-6%, Zn - rest
    Unfortunately none of the grades doesn't have exact equivalent in China.
    Information is taken from WinAlloy software

  • 13.06.2006
    What are the other international equivalent materials for A572 Gr.50? Is AH36, BS4360 Gr50B, SS400 or Q345B equivalent to A572 Gr.50?
    The grades you are mentioned are not foreign equivalences of the A572 Gr.50.
    This grade is unique and doesn't have foreign equivalences.
    Information is taken from WinSteel software

  • 13.06.2006
    Please advise the ASTM equivalence for AISI 303, 440 and 431
    Please find ASTM equivalences for the AISI grades you are interested in:
    Grade 302: A 167 (302 B), A 276 (302 B), A 314 (302 B), A 473 (302 B), A 480 (302 B), A 580 (302 B)
    Grade 303: A 194 (303), A 194 (8F), A 194 (8F)(303+S), A 194 (8FA), A 194 (8FA)(303+S), A 314 (303), A 320 (303), A 320 (B8F), A 320 (B8F)(303+S), A 320 (B8FA), A 320 (B8FA)(303+S), A 473 (303), A 581 (303), A 582 (303), A 895 (303), F 593 (303), F 593 Group 1 (303), F 594 (303), F 594 Group 1 (303), F 738 (303), F 836 (303), F 837 (303), F 880 (303), F 899 (303)
    Grade 304: A 1022 (304), A 167 (304), A 182 (304), A 182 (F 304), A 193 (304), A 193 (B8), A 193 (B8A), A 194 (304), A 194 (8), A 194 (8)(304), A 194 (8A), A 194 (8A)(304), A 213 (304), A 213 (TP 304), A 240 (304), A 249 (304), A 269 (304), A 270 (304), A 271 (304), A 276 (304), A 312 (304), A 313 (304), A 314 (304), A 320 (304), A 320 (B8), A 320 (B8)(304), A 320 (B8A), A 320 (B8A)(304), A 336 (F304), A 358 (304), A 368 (304), A 376 (304), A 376 (TP 304), A 403 (CR 304), A 403 (WP 304), A 409 (304), A 430 (304), A 473 (304), A 478 (304), A 479 (304), A 492 (304), A 493 (304), A 511 (MT304), A 554 (MT304), A 580 (304), A 632 (304), A 632 (TP 304), A 666 (304), A 688 (304), A 774 (304), A 774 (TP 304), A 793 (304), A 813 (304), A 813 (TP 304), A 814 (304), A 814 (TP 304), A 851 (304), A 851 (TP 304), A 908 (304), A 943 (TP 304), A 965 (F304), A 988 (S 30400), F 1667 (304), F 2215 (S 30400), F 2281 (304), F 593 (304), F 593 Group 1 (304), F 594 (304), F 594 Group 1 (304), F 738 (304), F 836 (304), F 837 (304), F 879 (304), F 880 (304), F 899 (304), G 108 (304), G 123 (304)
    Information is taken from WinSteel software

  • 12.06.2006
    What are the other international equivalent materials for A572 Gr.50? Is AH36, BS4360 Gr50B, SS400 or Q345B equivalent to A572 Gr.50?
    The US equivalents of the 55 Si 7 German grade are: AISI: 9255, UNS: G 92550, ASTM: A 29 (9255), A 331 (9255), A 519 (9255), A 711 (9255), A 752 (9255).
    Information is taken from WinSteel software

  • 12.06.2006
    I have a metal in either Euronorm or DIN What is it in ASTM or some other US equivalant. The metal is a spring steel listed as "55 SI 7"
    The US equivalents of the 55 Si 7 German grade are: AISI: 9255, UNS: G 92550, ASTM: A 29 (9255), A 331 (9255), A 519 (9255), A 711 (9255), A 752 (9255).
    Information is taken from WinSteel software

  • 07.06.2006
    What is the ASTM equivilant of S275JR
    Please find the list of ASTM grades, which are equivalent to S275JR European grade: A 108 (1015), A 252 (1), A 252 (2), A 252 (3), A 29 (1012), A 29 (1015), A 29 (M 1012), A 29 (M 1015), A 331 (1012), A 331 (1015), A 331 (M 1012), A 331 (M 1015), A 510 (1012), A 510 (1015), A 512 (1012), A 512 (1015), A 512 (MT 1015), A 513 (1012), A 513 (1015), A 513 (MT 1015), A 519 (1012), A 519 (1015), A 519 (MT 1015), A 545 (1012), A 545 (1015), A 549 (1012), A 549 (1015), A 568 (1012), A 568 (1015), A 570 (30 Ty.1), A 570 (30 Ty.40), A 570 (30), A 570 (33 Ty.1), A 570 (33 Ty.40), A 570 (33), A 570 (36 Ty.1), A 570 (36 Ty.40), A 570 (36), A 570 (40), A 575 (M1010), A 575 (M1015), A 576 (1012), A 576 (1015), A 611 Grade C, A 611 Grade D, A 635 (1012), A 635 (1015), A 659 (1015), A 689 (1012), A 689 (1015), A 711 (1012), A 711 (1015), A 787 (1015), A 794 (1015), A 830 (1012), A 830 (1015), A 853 (1015)
    Information is taken from WinSteel software

  • 02.06.2006
    what is the ATSM, and AMS velent of AISI 4340 steel
    Please find a list of equivalences below:
    AMS: 6359, 6359 F, 6409, 6409 A, 6414, 6414 H, 6415, 6415 P, 6454, 6454 B
    ASTM: A 29 (4340), A 320 (L43)(4340), A 322 (4340), A 331 (4340), A 506 (4340), A 519 (4340), A 646 (4340-7), A 646 (7)(4340), A 711 (4340), A 752 (4340), A 829 (4340)
    Information is taken from WinSteel software

  • 02.06.2006
    who manufactures aisi steel in China
    ??????
    I think that many manufacturers in China produce different AISI grades. But I can't give you exact answer.

  • 02.06.2006
    Kindly advise what is the difference in steel grades 08kp and 3sp, i.e. what properties differ due to difference in content of various chemical elements and which of these steel grades is of a higher standard.
    Please notice that St3sp and 08kp are grades of different types. St3sp is ordinary structural steel whereas 08kp is quality structural steel. Unfortunately I have no possibility to explain you difference between these two types of steels here as well as to recopy physical metallurgy manuals where you can find information how properties of a grade depend of its composition.

  • 02.06.2006
    First of all I congratulate you in order to provide this very useful service. I need single questions for now and will be pleasure if you help me.. Please could you inform me about DIN or ASTM equivalences of below standart ? 48A GOST 1435-74 (Unalloyed tool steel)
    Please notice that GOST 1435-74 is not valid now. This GOST is replaced by GOST 1435-99. Both two mentioned GOSTs don't contain the 48A grade. May be you mean 8 (U8A)? DIN equivalent of this grade is C 80 W 1, the ASTM equivalent is A 686 (W-1).
    Information is taken from WinSteel software

  • 02.06.2006
    What is the ASTM equivilant of JIS G3101 SS400?
    Please find ASTM equivalences of the Japanese grade you are interested in below: A 108 (1015), A 283 (D), A 284 (C), A 284 (D), A 29 (1012), A 29 (1015), A 331 (1012), A 331 (1015), A 510 (1012), A 510 (1015), A 512 (1012), A 512 (1015), A 513 (1012), A 513 (1015), A 519 (1012), A 519 (1015), A 545 (1012), A 545 (1015), A 549 (1012), A 549 (1015), A 568 (1012), A 568 (1015), A 575 (M1010), A 575 (M1015), A 576 (1012), A 576 (1015), A 611 Grade C, A 611 Grade D, A 635 (1012), A 635 (1015), A 659 (1015), A 689 (1012), A 689 (1015), A 711 (1012), A 711 (1015), A 787 (1015), A 794 (1015), A 830 (1012), A 830 (1015), 853 (1015).
    Information is taken from WinSteel software

  • 01.06.2006
    pls provide me more details of PANTANAX 3401
    Please notice that PANTANAX 3401 grade is commercial name of X120Mn12 (1.3401) German grade with the following composition: C 1.2%, Mn 12.5%, Si 0.4%.
    Information is taken from WinSteel software

  • 01.06.2006
    ASTM equivalaent of BS 1452 Gr 14 & its composition.
    Please notice that BS 1452: 1990 SPECIFICATION FOR FLAKE GRAPHITE CAST IRON is not valid now. This standard was replaced by BS EN 1561 FOUNDING - GREY CAST IRONS. We have found Gr 14 you are interested in more early issue of this standard BS 1452: 1961. Now the name of this grade is Gr 220. ASTM equivalent is A 48 Gr 30 B.
    Information is taken from WinSteel software

  • 01.06.2006
    ASTM equivalant of EN 24 H & G & its composition
    The name of EN 24 is DOORS; MEASUREMENT OF DEFECTS OF GENERAL FLATNESS OF DOOR LEAVES. This standard is out of our competence. Our activity is steel and non-ferrous.

  • 01.06.2006
    Who manufacturers profiled sheet and composite panels in Russia ?
    The profiled sheets are manufactured by the following CIS companies: Antratsit Sectional Hothouses Works, ARS-Prom, Building Constructions Plant, Chelyabinsk Works "Profnastil", Cold Profiling Metal Plant DiPOS, Dnepropetrovskmetalloprom, Dunaferr, Engels Tube and Pipe Works, Eurosteel Technology, Fasteh, Inprom - Profil, Insi, Irkutsk Plant "Profnastil", Kaluga-Stalprom, Kamsky Plant on Production Braking Apparatus and Units, Kansk Light-Gage Construction Plant "Mayak", Kazan Steel Profiles, Khabarovsk Steelwork Manufacturing Plant, Klimovskiy profnastil, Korolevsky Zavod Profnastila, LAMIERA roofing center, Light Steel Sections Works, Lights Metallic Conctructions Vyksa Factory, Lysva Steel Works, Magnitogorsk Hardware-Kalibrovochny Zavod "MMK-METIZ", Mariupol Ilyich Iron and Steel Works, MAYAK Company, MetaKom, Metall Profil, Metallcomplect, Metallresurs, Metrall-Product, Mittal Steel Temirtau - Karaganda Steel Works, MMK - Magnitogorsk Iron and Steel Works, Modul, Molodechno Metal Constructions Plant, Novolipetsky Iron and Steel Works - NLMK, Odintsovo Steelwork Manufacturing Plant, Orsk Steelwork Manufacturing Plant, Perm Profiled Flooring Plant "Kvin", Pervouralsk Complete Metal Constructions Works, Profcomplekt, Profile, PromStalProfil, Promstan, Roofing and Wall Sections Works, Samara Plant "ElectroShield", Sector-D, Severstal - Cherepovets Iron and Steel Works, Sosnovoborsk Corrugated Steel Works VADEN, Spetsatomkontact-2, SPLAV Company, StalColorProfil, Standard Metal Group, Steel Constructions, Steelinvest, StilKon, Taldom Profil, TBMk, Trading Firm "Profil", VENTALL Steelwork Manufacturing Plant, Voronezh Aluminium Works, Weld, Zaporizhstal Iron and Steel Works, Zlatoust Steelwork Manufacturing Plant.
    Information is taken from WinPlant. BLACK software.
    Information of producers of composite panels doesn't included in our database.

  • 30.06.2006
    WHAT IS THE ASME EQUIVALENT MATERIAL FOR API 5L GR X 52 AND GRADE 56
    Please notice that API 5L Gr X-52 and Gr X-56 are used for welded pipes for pipelines. Standard API 5L which covers these grades is issued by Americam Petroleum Institute. The main in this standard is performance attributes of the pipes (not composition). ASME is American Society of Mechanical Engineers. This society works in another field. So it is very difficult to compare standards of these two institutes, which work in different industry branches.

  • 23.05.2006
    Steel grade St E 460, is it quite same than S355J2G3
    Please notice that equivalent of St E 460 grade is another European grade S460N.
    Information is taken from WinSteel software

  • 19.05.2006
    Excuse me Sir, This is Leo From China, Here I need you help on finding the equivalnces for (ASTM A653 galvanize) Grade 50 and Grade CS, type B? And could you please show me the chemical and physical properties of this two grade? thanks very much.
    Unfortunately the grades you are interested in have not Chinese equivalences. Compositions see below:
    A 653 (CS Type B) C 0.02-0.15%, Mn 0.6%, P < 0.03%, S < 0.035%
    A 653 (SQ 50) C 0.21%, Mn 0.75%, S 0.015%, Al 0.05%
    A 653 (SS 50) C 0.2%, P < 0.02%, S < 0.04%
    Information is taken from WinSteel software

  • 17.05.2006
    What is chemical composition of 38CHN3MFA ?
    Please find composition of the 38ChN3MFA grade below: C 0.33-0.40%, Si 0.17-0.37%, Mn 0.25-0.50%, P<0.025%, S<0.025%, Cr 1.2-1.5%, Mo 0.35-0.35%, Ni 3.0-3.5%, V 0.10-0.18%, Ti<0.03%, Cu<0.3%, N<0.008%, W<0.2%
    Information is taken from WinSteel software

  • 17.05.2006
    What is the Indian equivalent or American Equivalent of European S235J2G3 steel according to EN 10025?
    Please notice that we have not Indian grades in our database. As for American ones please find the list of equivalent ASTM and UNS grades below: A 283 (D), A 284 (C), A 284 (D), A 515 (55), A 570 (30), A 570 (33), A 570 (36), A 570 (40), A 573 (58), A 573 (70), A 611 (A), A 611 (B), A 611 (C1), A 611 (C2), A 611 (D2), A 611 (E), A 618 (Ia), A 618 (Ib), A 618 (lb), K 01804, K 02001, K 02301, K 02502, K 02601, K 02701, K 02702.
    Information is taken from WinSteel software

  • 06.05.2006
    What is GOST TU analogs for DIN1. 2379 and DIN 1. 2363 steel
    The GOST equivalences of the 1.2379 Germany grades are Ch12MF, Ch12F1
    The GOST equivalences of the 1.2363 Germany grades are 9Ch5VF, Ch6VF
    Information is taken from WinSteel software

  • 06.05.2006
    What are the chemical and physical properties of Chinese material Q345 ( A to E whichever is for for wide flange shapes)??
    Q 345 A: C<0.2%, Si<0.55%, Mn 1.0-1.6%, P<0.045%, S<0.045%, V 0.02-0.15%, Nb 0.015-0.060%, Ti 0.02-0.20%
    Q 345 B: C<0.2%, Si<0.55%, Mn 1.0-1.6%, P<0.040%, S<0.040%, V 0.02-0.15%, Nb 0.015-0.060%, Ti 0.02-0.20%
    Q 345 C: C<0.2%, Si<0.55%, Mn 1.0-1.6%, P<0.035%, S<0.035%, V 0.02-0.15%, Nb 0.015-0.060%, Ti 0.02-0.20%, Al>0.015%
    Q 345 D: C<0.2%, Si<0.55%, Mn 1.0-1.6%, P<0.030%, S<0.030%, V 0.02-0.15%, Nb 0.015-0.060%, Ti 0.02-0.20%, Al>0.015%
    Q 345 E: C<0.2%, Si<0.55%, Mn 1.0-1.6%, P<0.025%, S<0.025%, V 0.02-0.15%, Nb 0.015-0.060%, Ti 0.02-0.20%, Al>0.015%
    Unfortunately our database doesn't contain information on properties of these grades.
    Information is taken from WinSteel software

  • 02.05.2006
    What is ASTM/ steel equivalent to chinese Q195
    The ASTM equivalnces of the Q 195 Chinese grades are A 366, A 569
    Information is taken from WinSteel software

  • 02.05.2006
    Could you please tell me the number and name of the GOST or TU standard which specifies the requirements for linepipe equivalent to API 5L Grade X52, X56 or ISO 3183 Grade L360 (i.e approx 350-390 MPa yield).
    Please find the list of Russian TUs you needs:
    TU U 27.2-00191135-073-20 (CIS Countries) Electric-welded longitudinal advanced reliability steel tubes of diameter 720-1220mm for line pipes (pressure up to 7.4 MPa)
    TU 14-1-3636-83 (CIS Countries) Steel strip for gas-main pipes
    TU 14-1-5387-99 (CIS Countries) Steel strips for pipe-line tubes according to API 5L
    GOST 20295-85 (CIS Countries) Steel welded pipes for main gas-and-oil pipelines. Specifications.
    TU 1381-144-0147016-01 (CIS Countries) Helical electric-welded cold- and corrosion-resistant bulk heat-treated gas-oil pipes for JSC "SURGUTNEFTEGAS" deposits
    TU 1381-158-0147016-01 (CIS Countries) Electric-welded spiral tubes, volume heat-treated, for field pipeline for mediums with increased corrosivity
    TU 14-3-1971-97 (CIS Countries) Seamless hot-formed carbon corrosion-resistant steel gas-and-oil pipes
    The list of Russian equivalences of the API grades was emailed.
    Information is taken from WinSteel software

  • 02.05.2006
    Composition and properties of carbon steel trip, grade 1015 ASTM A 659
    Composition of the A 659 (1015) is C 0.13-0.18%, Mn 0.3-0.6%, P<0.04%, S<0.05%
    Properties as-rolled: Tensile strength 420.6 MPa, Yield strength 313.7 MPa, Hardness HB 126, Elongation 39%, Contraction 61%, Izod Impact Strength 110.5 J
    Information is taken from WinSteel software

  • 02.05.2006
    Material ASTM A365 equivalent to AISI ____ or JIS ________ ? what its chemical composition?
    1) Please notice that ASTM A365- Withdrawn 1968: Specification for Cold-Rolled Carbon Steel, Drawing Quality, and Special Killed is replaced by A619/A619M-97 Standard Specification for Non-Killed Forming Steel (NKFS) Sheet, Carbon Cold-Rolled (Withdrawn 1998) now.
    2) Unfortunately the grades mentined in the standard have not AISI designations.
    3) Japanese equivalences are SPCD JIS G 3141 and SPCE JIS G 3141.
    Information is taken from WinSteel software

  • 18.04.2006
    Who in Russia produces galvanised coil which has been slit ?
    The gavanized strips you need are produced by the following mills: MMK - Magnitogorsk Iron and Steel Works, Magnitogorsky kalibrovochny zavod (MKZ), Novolipetsky Iron and Steel Works - NLMK, Nytva Metallurgicall Works, Severstal, St.-Petersburg Steel Rolling Works
    Besides there are many trade companies in Russia which can slit the coils before sale.
    Information is taken from WinPlant. BLACK software.

  • 18.04.2006
    Which are the plants of special steel alloys and tooling steel in Ucraine and Russia to contact them ? Which are the plants to forge special alloy for shafts ? 4340 forge steel, 320mm diam. x 1997mm length. D-2, D-3, H-12, H-13, Carbid tugsten rings plants, M-2 etc.
    Unfortunately none CIS mill doesn't produce forges you need of this grade. The most closest is dia 317.5 mm produced by Krasnyj Oktyabr (Volgograd). Grades H-13 and M-2 are produced by Izhstal.
    Information is taken from WinPlant. BLACK software.

  • 18.04.2006
    WHO IS MANUFACTURING ASTM A 453 GRADE 660 CLASS-A AND B ROUND BARS IN RUSSIA AND WHAT IS THE EQUIVALENT GRADE IN GOST
    The equivalent Russian grade is EP674 (08Ch15N25T2MFR). Rounds of this grades are produced by MeChel (Chelyabinsk Iron & Steel Works) and Electrostal.
    Information is taken from WinPlant. BLACK and WinSteel software.

  • 17.04.2006
    Which ASTM standard is equivalent to the chemical composition of steels 20L (GOST 977-88)?
    The ASTM equivalences of the 20L grade are: A 216 Gr WCA, A 732 (1A)
    Information is taken from WinSteel software

  • 12.04.2006
    Which JIS standard is eqipvalent of ASTM A570 Grade 50? Is it possible for JIS G3101 SS400 ?
    The analogue of ASTM A570 Grade 50 is SS490 JIS G3101 Japanese grade
    Information is taken from WinSteel software

  • 12.04.2006
    Which JIS standard is equipvalent of ASTM A709 Grade 50? and is it possible for JIS G4051 S45C?
    Please notice that ASTM A709 contains eight 50 grades: A709 Grade 50[345] Type 1, A709 Grade 50[345] Type 2, A709 Grade 50[345] Type 3, A709 Grade 50[345] Type 4, A709 Grade 50[345] Type 5, A709 Grade 50W A, A709 Grade 50W B, A709 Grade 50W C. Please specify in which grades you are interested in.

  • 12.04.2006
    What is ASTM / JIS Steel Grade Equivalent to Chinese Q345 ?
    Please notice that there are five Q 345 grades in China: Q 345 A, Q 345 B, Q 345 C, Q 345 D, Q 345 E. Unfortunately all of them have not any equivalences in ASTM / JIS standards.
    Information is taken from WinSteel software

  • 11.04.2006
    foreign equivalent of russian alloys 30XGCA
    The 30ChGSA Russian steel grade has exact foreign analogue in Czech Republic only. Its name is 14 331
    Information is taken from WinSteel software

  • 10.04.2006
    wat is equivalent astm material of S275JR
    Please find the list of ASTM grades, which are equivalent to S275JR European grade: A 108 (1015), A 252 (1), A 252 (2), A 252 (3), A 29 (1012), A 29 (1015), A 29 (M 1012), A 29 (M 1015), A 331 (1012), A 331 (1015), A 331 (M 1012), A 331 (M 1015), A 510 (1012), A 510 (1015), A 512 (1012), A 512 (1015), A 512 (MT 1015), A 513 (1012), A 513 (1015), A 513 (MT 1015), A 519 (1012), A 519 (1015), A 519 (MT 1015), A 545 (1012), A 545 (1015), A 549 (1012), A 549 (1015), A 568 (1012), A 568 (1015), A 570 (30 Ty.1), A 570 (30 Ty.40), A 570 (30), A 570 (33 Ty.1), A 570 (33 Ty.40), A 570 (33), A 570 (36 Ty.1), A 570 (36 Ty.40), A 570 (36), A 570 (40), A 575 (M1010), A 575 (M1015), A 576 (1012), A 576 (1015), A 611 Grade C, A 611 Grade D, A 635 (1012), A 635 (1015), A 659 (1015), A 689 (1012), A 689 (1015), A 711 (1012), A 711 (1015), A 787 (1015), A 794 (1015), A 830 (1012), A 830 (1015), A 853 (1015)
    Information is taken from WinSteel software

  • 03.04.2006
    What is European Steel Grade Equivalent to Chinese Q235A & Q345b
    The European equivalences of Q 235 A Chinese grade are S235J2G3 and S235JRG2.
    As for Q 345 B the closest (not the same) grades are S355J2G3, S355JRG2.
    As for your second question I can advice you our software WinSteel, which hepls me to answer to your question.

  • 29.03.2006
    What is the chemical composition of the Aluminium alloy as per DIN EN 12020 ?
    EN 12020 Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063
    AW-6060: Mg 0.35-0.60%, Si 0.3-0.6%, Fe 0.1-0.3%, Zn < 0.15%, Mn < 0.1%, Ti < 0.1%, Cu < 0.1%, Cr < 0.05%, OT < 0.15%, OE < 0.05%, Al - Rest
    AW-6063: Mg 0.45-0.90%, Si 0.2-0.6%, Fe < 0.35%, Zn < 0.15%, Mn < 0.1%, Ti < 0.1%, Cu < 0.1%, Cr < 0.1%, Zn < 0.1%, OT < 0.15%, OE < 0.05%, Al - Rest
    Information is taken from our software WinAlloy

  • 29.03.2006
    That Russian type we can use instead of CuZn40Pb2F37
    The Russian equivalent of this grade is LS59-2.
    Information is taken from our software WinAlloy

  • 24.03.2006
    What is Chemical Composition of ASTM A615 Grade 40 and Grade 60?
    Please notice that ASTM A615 defines content of phosphorum only in these both grades 0.075% max. Contents of other elements are not defined.
    Information is taken from WinSteel software

  • 22.03.2006
    What is the chemical composition of the Aluminium Bronze grade GFeAlBzF50
    Please find composition of the grade G-FeAlBz F50 you are interested in: Cu > 83.0%, Al 8.0-11.0%, Fe 2.0-4.0%, Ni < 3.0%, Mn < 1.0%, Zn < 0.5%, Sn < 0.3%, Si < 0.2%, Pb < 0.2%, OT < 1.0%.
    Information is taken from WinAlloy software

  • 20.03.2006
    What ASTM steel is equivalant to Japan SWCH45 steel?
    Please notice that there is not exact American equivalent of the Japan grade you are interested in. The similar grades are A108 (1045), A510 (1045).
    Information is taken from WinSteel software

  • 17.03.2006
    we rqueste to suggest the supplier for M3 copper grade ,gost 859-78 in form of sheet in 1.0 mm thk
    The sheets you are interested in are manufactured by: Artyomovsk Non-Ferrous Metal Processing Plant, Guysky Non-Ferrous Metal Working Plant "Splav", Krasny Vyborzhets, Kirov Non-Ferrous Metal Processing Plant, Kolchugino Non-Ferrous Metal Works
    Information is taken from WinPlant.RED software

  • 16.03.2006
    chemical and physical steel grade 15 x5M
    Please see a list of ASTM standards which are equivalent to EN 10025 S275JR grade: A 108 (1015), A 252 (1), A 252 (2), A 252 (3), A 29 (1012), A 29 (1015), A 29 (M 1012), A 29 (M 1015), A 331 (1012), A 331 (1015), A 331 (M 1012), A 331 (M 1015), A 510 (1012), A 510 (1015), A 512 (1012), A 512 (1015), A 512 (MT 1015), A 513 (1012), A 513 (1015), A 513 (MT 1015), A 519 (1012), A 519 (1015), A 519 (MT 1015), A 545 (1012), A 545 (1015), A 549 (1012), A 549 (1015), A 568 (1012), A 568 (1015), A 570 (30), A 570 (33), A 570 (36), A 570 (40), A 575 (M1010), A 575 (M1015), A 576 (1012), A 576 (1015), A 611 Grade C, A 611 Grade D, A 635 (1012), A 635 (1015), A 659 (1015), A 689 (1012), A 689 (1015), A 711 (1012), A 711 (1015), A 787 (1015), A 794 (1015), A 830 (1012), A 830 (1015), A 853 (1015)
    Chemical composition: C 0.15% max, Si 0.55 max, Mn 0.5% max, P 0.03% max, S 0.025% max, Cr 4.5-6.0%, Mo 0.45-0.60%, Ni 0.6% max, V 0.05% max, Ti 0.03% max, Cu 0.2% max, W 0.3% max
    Properties after heat treatment: Tensile strength 588 MPa min; Yield strength 412 MPa min; Elongation 16% min; Contraction 65% min; Hardness HB 235 min; Impact strength KCU 98 J/sq sm min
    Information is taken from WinSteel and and RusSteel (available in Russian only) software

  • 10.03.2006
    PLEASE EQUIVALENT IN ASTM STANDARD FOR EN10025 S275JR A42B.
    Please see a list of ASTM standards which are equivalent to EN 10025 S275JR grade: A 108 (1015), A 252 (1), A 252 (2), A 252 (3), A 29 (1012), A 29 (1015), A 29 (M 1012), A 29 (M 1015), A 331 (1012), A 331 (1015), A 331 (M 1012), A 331 (M 1015), A 510 (1012), A 510 (1015), A 512 (1012), A 512 (1015), A 512 (MT 1015), A 513 (1012), A 513 (1015), A 513 (MT 1015), A 519 (1012), A 519 (1015), A 519 (MT 1015), A 545 (1012), A 545 (1015), A 549 (1012), A 549 (1015), A 568 (1012), A 568 (1015), A 570 (30), A 570 (33), A 570 (36), A 570 (40), A 575 (M1010), A 575 (M1015), A 576 (1012), A 576 (1015), A 611 Grade C, A 611 Grade D, A 635 (1012), A 635 (1015), A 659 (1015), A 689 (1012), A 689 (1015), A 711 (1012), A 711 (1015), A 787 (1015), A 794 (1015), A 830 (1012), A 830 (1015), A 853 (1015)
    I can't select the standard you need as don't know which product of this grade you are interested in.
    Information is taken from our software WinSteel

  • 09.03.2006
    ASTM equivalent for European Spec S355J2G3
    Unfortunately the European grade you are interested in has not exact equivalences in ASTM.

  • 07.03.2006
    I am interested in the Polish equivalent to British CR4
    The Polish equivalent of British CR4 grade is 08X by PN H-84019
    Information is taken from our software WinSteel

  • 01.03.2006
    Please confirm that deformed steel bars 35GS are used as equivalent to ASTM A615 Grade 60 and can be sold as such.
    Please notice that the Tensile Strength (main property for reinforcment steel) of ASTM A615 Grade 60 is 600 MPa. This is class At600 according to Russian classification. Tensile Strength of the 35GS is 800 MPa (class At800). So the 35GS is high-quality grade.
    Information is taken from our software WinSteel

  • 27.02.2006
    Please advise European standard for Forged bars, grade 4130 within dia. range 300/600mm with lenght 4/6.000 mm
    The European equivalent is 25CrMo4 by the EN 10250-3 'Open die steel forgings for general engineering purposes. Non-alloy quality and special steels'.
    Information is taken from our software WinSteel

  • 26.02.2006
    could you tell me please what is ASTM equivalents of AISI 4130 and AISI 4140
    The 4130 AISI grade is included in the following ASTM standards: A 29 (4130), A 322 (4130), A 331 (4130), A 506 (4130), A 507 (4130), A 513 (4130), A 519 (4130), A 646 (11)(4130), A 646 (4130), A 689 (4130), A 711 (4130), A 752 (4130), A 829 (4130), A 866 (4130).
    The ASTM equivalences of the 4140 grade are: A 193 (4140), A 193 (B7M), A 194 (4140), A 194 (7), A 194 (7M), A 29 (4140), A 320 (L7)(4140), A 320 (L70)(4140), A 320 (L7M)(4140), A 322 (4140), A 331 (4140), A 506 (4140), A 513 (4140), A 519 (4140), A 646 (12)(4140), A 646 (4140), A 689 (4140), A 711 (4140), A 752 (4140), A 829 (4140), A 866 (4140).
    Information is taken from our software WinSteel

  • 26.02.2006
    For SA-515-70 steel, how do I calculate yield strength from a hardness number? Thank you
    Please notice that your question is not for free answer (see samples of the free answer questions) and require additional work of our staff which must be paid.

  • 20.02.2006
    we are having requirement of hot deformedseamless steel pipe od 25mm x wall thickness 7mm in multiple length of 3 mtr total quaninty 75mtr spec 25x7 gost 8732-78/b 40 x gost 8731-74 or 40xgost 4543-71 (c-(0.36-0.44)%,(0.17-0.37)%,mn-(0.50-0.80)%,cr-(0.80-0.10)% please inform us about the manufacturer of this pipe
    The tubes you need of 40Ch (40X) grade are produced by Dnepropetrovsk Tube & Pipe Works and Pervouralsk Novotrubny Tube and Pipe Corp. As for 25X7 this grade is not exist now.
    Information is taken from WinPlant.BLACK software.

  • 20.02.2006
    we are having requirement of gost russian standard books of metals example astm standard books are mareican standard book
    Unfortunately book of Russian GOSTs doesn't exist. But we have all steel and metal GOSTs in PDF but in Russian only. Is it acceptable for you?

  • 20.02.2006
    when i searched the net your the only site came up as result. i wish you could help me. i would like to compare ASTM A992/A992M against BS EN 10083 C45. Thank you very much.
    Unfortunately our database doesn't contain any reference to ASTM A992/A992M standard. As for BS EN 10083 C45 the American analogue of this grade is AISI 1045.
    Information is taken from our software WinSteel

  • 20.02.2006
    Who in CIS produces : Mild Steel Hollow Bush ( pipe ) : Seamless Hot Rolled , Grade : ST 52.3 outer diameter ranging from 51 to 250 mm inner diameter ranging from 31 to 200 mm
    The tubes you need are partly produced by Dnepropetrovsk Tube & Pipe Works (dia 57-168 mm, wall thickness 10-25 mm) and Seversky Tube Works (dia 219-245 mm, wall thickness 10-25 mm). Please notice that the above mills produce the tubes of 17G1S Russian grade which is equivalent of St 52-3 German grade.
    Information is taken from WinPlant. BLACK and WinSteel software.

  • 15.02.2006
    What is the GOST equivalent to the cast low temperature carbon steel ASTM A352 LCC ?
    The GOST equivalent of this steel is 20GL
    Information is taken from our software WinSteel

  • 13.02.2006
    Please let me know the chemical composition of material as per 961 GOST 2176-67. what is equivalent material as per British standard. Is it stainless steel ?
    Please notice that GOST 2176-67 is not valid now. Composition of 961 (EI961) is described by GOST 5632-72. This is stainless grade but with V and W content. So this grade has not any equivalences in the world. Please see composition below:
    C 0.10-0.16%, Si<0.6%, Mn<0.6%, P<0.03%, S<0.025%, Cr 10.5-12.0%, Mo 0.35-0.50%, Ni 1.5-1.8%, V 0.18-0.30%, Ti<0.2%, Cu<0.3%, W 1.6-2.0%
    Information is taken from our software WinSteel

  • 08.01.2006
    what is the equivalent of 44SMn28 in IS or JIS
    The Japanese equivalent of the grade you are interested in is SUM 43
    Information is taken from our software WinSteel

  • 08.01.2006
    What is equivalent grade of material in DIN, AISI / ASTM std for Sandvik 20 C
    The American equivalent of the Sandvik grade you are interested in is AISI 1095, the German equivalent is Ck 101.
    Information is taken from our software WinSteel

  • 06.01.2006
    I would like to know the ASTM equivalent to European DD11 code under UNI EN 10111
    The ASTM equivalences of the grades you are interested in are A621 and A622.
    Information is taken from our software WinSteel

  • 02.01.2006
    gost standard for AL alloy castings
    GOST 1583-93 Aluminium casting alloys. Specifications.
    GOST 2171-90 Pieces, products, semi-finished products and billets of non-ferrous metals and alloys. Grade definition

  • 30.01.2006
    What is the chemical composition of Aluminium material as per Russian standard GOST 2685-75 An4
    Please notice that GOST 2685-75 is not valid now. This GOST was replaced by GOST 1583-93 Aluminium casting alloys. Specifications. The correct name of the grades you are interested in is AL4. The chemical composition is below: Si 8.0-10.5%, Mn 0.2-0.5%, Mg 0.17-0.30%, Fe 0.6% max, Cu 0.3% max, Zn 0.3% max, Ti 0.2% max, Ni 0.1% max, Be 0.1% max, Sr 0.08% max, Pb 0.03% max, Sn 0.01% max, OT (total context of admixtures) 1.1% max, Al - Rest
    Information is taken from our software WinAlloy

  • 24.01.2006
    What is DIN EQUIVALANT OF D40S CONFIRMING TO GOST 5521-93, GRADE 10 X SND CONFIRMING TO GOST 19281-89, GRADE 10 X SND CONFIRMING TO GOST 17066-94
    Unfortunately the Russian grades you are intersted in have not foreign equivalences.

  • 23.01.2006
    What is the commercial equivalent of stainless steel 12X18H9T to GOST5632-72?
    What do you mean commercial equivalent? Is it name used by any company?
    As for foreign analogues the 321 AISI American grade is equivalent to this Russian grade

  • 23.01.2006
    What is the american equivalent of Phosphor Bronze 03U7C5H1 to GOST 613-79?
    The correct name of the bronze you are interested in is BrO3Ts7S5N1. The American equivalent of this grade is C 83810. Information is taken from our software WinAlloy

  • 18.01.2006
    What is the russian equivalent of S235 JR steel?
    Please notice that European grade S235JR has not exact equivalents in GOST. The closest grades are 10 GOST 1050, St3 GOST 380 and S235 GOST 27772-88 (used in construction).
    Information is taken from our software WinSteel
    Note that Russian steel works produce S235JR grade according to EN standards also. If it is interesting for you please indicate which products of this grade do you need.

  • 17.01.2006
    What is DIN-EN equivalent of GOST 380-71grade BCT3Gnc5 and BCT3kn2steel
    The GOST 380-71 is replaced by GOST 380-88. The European analogues of St3Gps grade are S275JR and S275J2G3. St3kp grade is equivalent to S235JRG1 EN grade. Prefixe B is not used before steel grade name in new GOST

  • 17.01.2006
    What is DIN-EN equivalent of GOST 19282-73 grade 09G2C-12 ( and 19281-89 equivalent of the same steel)
    Unfortunately there are not same grades in DIN-EN standards. The most closest grade is 13 Mn 6.
    Please notice that GOST 19282-73 Low-alloyed plate strip universal steel. Specifications is not valid now. This GOST was replaced by GOST 19281-89 Rolled steel with increased strength. General specifications.

  • 11.01.2006
    Would you please inform us that what kinds of material of Din Standard QST 36 or DIN EN 1.2014?
    The German grade you are interested in is called QSt 36-3 or 1.0214. The grade is covered by DIN 1654 Part 2.

  • 11.01.2006
    GOST 1051 WITH LATEST AMENDMENTS ENGLISH VERSION
    Unfortunately we have the GOST you need in Russian only. But English translation is available. Price is USD8 for a page. If you are ready to pay please let me know.

  • 11.01.2006
    Please send detail phyisal & chemical properties of Steel Manufactuered under GOST 1051-73
    Please notice that GOST 1051-73 'Gauged bars. General specifications' defines dimensions of the square bars only. As for grades compositions and properties this GOST refers to several other GOSTs for different types of steel, i.e. 1050, 1414, 1435, 5949, 5050, 14959, 19265, 20072, etc.
    Please specify your inquiry. Which grades are you interested in?



Terms of use


  • We provide help to our subscribers only. Our subscription is free.
  • Subscribers must provide their Member ID or Account reference number in an e-mail. Both are provided in My ACCOUNT - Member profile.
  • The cost of 1 question is 30 EUR. Discounts are provided on multiple questions.
  • If we don't find an answer to your question - we will provide a refund or alternatively you may ask us another question.
Database
1 question - 30 EUR
3 questions - 75 EUR
5 questions - 120 EUR



Databases


International translator of steel grades WinSteel - international translator of steel grades
Automated directory of steel plants WinPlantBlack - automated directory of steel plants
International translator of non-ferrous metals & alloys grades WinAlloy - international translator of non-ferrous metals & alloys grades
Automated directory of non-ferrous plants WinPlantRed - automated directory of non-ferrous plants



Navigation

Login and password reminded Login
Get your FREE membership Register FREE account
Why subscribe? Why join?

Hot company Company

SEKOM Handelsges.m.b.H....
Our company is a private firm founded in 1990 with aim to develop export and import with Russia. We do promote EU industrial and consumer goods in Russia and strongly support marketing of Russian and CIS industrial products and services.
0 selling & 0 buying leads

Live support